Panasonic 250RX1 IGBT Inverter Controlled MIG Welding Machine

Features:


Inverter-Based Digital Wave Control GMAW And FCAW Welding Outfit.
Higher Efficiency and Higher Power Factor Results in Greater Power Saving.
Designed to Work Even Under High Ambient Temperatures Up To 500C.
Light Weight and Compact MIG/MAG/FCAW Welding Outfit.
Unique Design of Three Layer and Four Room Dust-Free Structure
RX1 Series is Manufactured as Per Std. IEC 60974-1:2000/GB 15579.1:2004.
Fresh Tip Treatment and Burn-Back Time Control are Adjustable.
Works on 50/60Hz Frequency in Power Supply.
Equipped With Synergic Mode (Unitary Function) in Which Welding Voltage is Set Based on the Welding Current Value Automatically. The Voltage can be Adjusted Finely to Fit the Beast Current Values.
Digitally Controlled Waveform Enables Superior Arc Characteristics.
Over Voltage and Under Voltage Protection
Overheating Protection
Single Phasing Protection
Protective 8 Amps Fuse For Protection of Wire Feed Motor.




Additional Specifications:



Input

Max, input KVA @415Vac
@ 60% duty cycle (KVA/KW) : 8/7.7

Output

Rated Current Range(Amps) : 50-250
Rated output range (V) : 12.26.5
Welding current (400C)
@60% Duty cycle (Amps) : 250
@100% Duty Cycle (Amps) : 193

General

Power control method : IGBT inverter controlled
Digital display : 4 digit 7 segment LED Display
Wave from control : Digitally controlled wave form
Welding sequence
a. Main welding
b. Main welding crater (crater repeat is available)
c. Main welding crater (crater repeat is available)
Ingress protection (Class) : IP 21S
Power Factor (Degree C) >0.9
Operating Temperature : -10 to 50
Dimension (L X B X H) : 545 x 380 x570
Weight (KG) : 44

Wire feeder

Rated welding current (amps) : 250
Applicable wire diameter : 0.8, 1.0
Cable length : 1.8 m (gas hose .8m)
Weight : 10kg
Wire feed speed : 5-20.1
Duty cycle : 60
Wire feeder available in standard lengths of 1.8 mtrs, 5 mtrs, 10 mtrs, 15 mtrs and 20 mtrs.Welding torch : 350
Duty cycle (10 min cycle) : 350 Amps, 60% (CO2) 315 Amps, 60% (CO2+Ar)
Duty cycle (continuous) : 270 Amps, 100% (CO2) 240 Amps, 100% (CO2+Ar)
Applicable wire diameter(mm) : 08., 1.0, 1.2
Cable length(meter) : 3
Weight (incl. cable)(KG) : 2.8
Power source : YD-250RX1DJE
Wire feeder : YW-25KB3DTE
Welding torch : YT-35CS4DAF
Remote management controller : TSMY11290


Buy Panasonic 250RX1 IGBT Inverter Controlled MIG Welding Machine online in India at wholesale rates. If you have been looking for Panasonic 250RX1 IGBT Inverter Controlled MIG Welding Machine dealers, your search ends here as you can get the best Panasonic 250RX1 IGBT Inverter Controlled MIG Welding Machine distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Panasonic 250RX1 IGBT Inverter Controlled MIG Welding Machine of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Panasonic 250RX1 IGBT Inverter Controlled MIG Welding Machine prices, you can be totally sure to get the best rates as Indusuno brings you genuine Panasonic 250RX1 IGBT Inverter Controlled MIG Welding Machine rates and quality assured products only from the best of brands with exclusive brand discounts you wont find anywhere else. Procure Panasonic 250RX1 IGBT Inverter Controlled MIG Welding Machine today and avail the best offers on your purchase.